All Stepcraft 2 machines are coming with UCCNC software. This program required a special parallel to USB interface (called a UC100) that is serialized to a license file that you will use when you install the software. In order to use this interface, we need to ship the machine with the parallel card.
Don’t worry, you do not need a parallel interface on your computer (which most modern computers and laptops don’t have). You simply plug the UC100 into the parallel port on the Stepcraft-2 machine and then plug the included USB cable into your computer.
-
- This is the parallel port on the back of the Stepcraft-2 machine.
-
- This is the UC100 Parallel to USB interface installed on the parallel port with a mini USB cable that attaches to your computer.
Leave A Comment