Avoiding the need to cut screws on Assembly Step 1.4 in the Stepcraft-2 assembly manual.

We read a lot of comments with machine owners stating that they need to cut the M6x10 screw (part #41) on assembly step 1.4 of the manual to prevent the lead screw holder (part #59) from not tightening. The fact is that the design of the brass lead screw holder is such that you can apply a lot of force when tightening the M6x10 screw until it is completely tight without the need to cut or shorten the screw.  You MUST use an L Shape Allen wrench to be able to apply the force to fully tighten the screw.